提升醫療門在安裝時常見的問題
A個問題：導軌的深度問題。醫療門采用門框全包圍設計，通過不同的色彩配色，采用微電腦控制，能人性化控制開關門速度、開門停留如果導軌的深度不夠結構與用料不當，一旦遇到火災，醫療門簾易從導軌脫出，起不到防火作用。
The first problem: the depth of the problem of guide rail. If the guide deep enough structure and materials properly, once encountered fire, the curtain rail easily from prolapse, not to the fire effect.
       第二個問題：提升醫療門傳動裝置的強度問題，軸的強度問題軸強度也是醫療門的一個重要參數，目前這種強度不合格的產品很多，嚴重影響了提升醫療門的使用。軸的結構主要指軸兩端軸頭塞人鋼管內的深度及其結構。軸頭塞人深度應為軸長的1／10左右，且要有兩個法蘭和足夠的焊縫。
Second problems: the strength problem of the door drive device of industrial upgrading, an important parameter of rolling shaft strength problem of shutter shaft strength is rolling door, at present a lot of the strength of the unqualified products, serious impact on the use of industrial upgrading door. The rolling shaft structure mainly refers to the depth and structure of rolling curtain shaft ends gudgeon Cypriot in steel pipe. Shaft plug depth should be axis length of 1 / 10, and have two flanges and adequate weld.
       第三個問題：提升醫療門的預卷問題，提升醫療門特別是鋼質提升醫療門體比較重，所以會在卷軸上面預留一圈預卷。醫療門采用門框全包圍設計，通過不同的色彩配色，采用微電腦控制，能人性化控制開關門速度、開門停留以減少醫療門簾重量對螺釘處的拉力．防止A塊簾板破裂。
Third issues: Volume problem of industrial upgrading door pre industrial promote the door especially steel industrial promote the door body is relatively heavy, so reserve a circle above the pre rolled on the reel. In order to reduce the weight of the screw at the curtain pull. Prevent the first piece of the curtain plate rupture.
       第四個問題：防火電控箱及煙感、溫感方面的問題，火災溫度控制關醫療門問題國標規定．在提升醫療門2米范圍內，當火災發生．電源中斷．現場無人操作時，應當有火勢溫度熔斷控制關醫療門裝置，這個功能特別對人員密集場所更顯重要。醫療門采用門框全包圍設計，通過不同的色彩配色，采用微電腦控制，能人性化控制開關門速度、開門停留
The fourth question: fire control box and the smoke and temperature sensing problems, problems of GB closed fire control temperature. In industrial promote the door within 2 meters, when the fire occurred. A power outage. The scene no operation, should have the fire temperature fuse control closing device, this function is particularly more important on the personnel intensive place.

•