平開醫用門醫用門扇材料及制作

                                               平開醫用門醫用門扇材料及制作
1、醫用門扇骨架選用冷軋方鋼管及角鋼、扁鋼等型材。醫院氣密門門體設計采用經表面噴塑的大平面不銹鋼板材、鋁塑板、PVC鋼板或防火板，裝有密封條，符合醫院使用的衛生要求，門體可有多個顏色選擇。一般醫用門型醫用門扇面板選用1.2mm厚壓型鋼板。保溫醫用門型醫用門扇面材料選用金屬絕熱材料夾芯板。
1, the door leaf framework cold-rolled square steel tube and angle steel, flat steel GOOGLE PRofiles。 The general door type door leaf panel using 1.2mm thick plate pressure. Thermal insulation door type door fan material selection of sandwich plate metal thermal insulation material.
   
　　2、醫用門扇骨架一概選用電弧焊接，焊條選用E4303，焊縫除注明者外均選用連續（Continuity)焊接，不得有未熔化、未焊透、氣孔、裂紋燒穿等焊接缺陷。
2, the door leaf framework all choose arc welding, weld with E4303 welding, unless otherwise stated all use continuous welding, is not no melting, no penetration, porosity, cracks in the welding defects such as burn。氣密門廠家門體設計采用經表面噴塑的大平面不銹鋼板材或鋁板，裝有密封條，符合醫院使用的衛生要求。
   
　　3、醫用門扇骨架型材應先調直后下料，在平整的場所或工作臺面上放樣后進行焊接，焊接后醫用門扇應校平直，不得逾越容許規范過失。氣密門廠家門體設計采用經表面噴塑的大平面不銹鋼板材或鋁板，裝有密封條，符合醫院使用的衛生要求。
3, the door leaf frame profile should be straightened after blanking, setting OUT(出局） on a flat place or the work table after welding, welding the door leaf should school straight, shall not exceed the allowable standard of negligence。
   
　　4、平開醫用門骨架加工制作經查驗合格后再鋪設面板。一般醫用門型醫用門扇面鋼板可選用點焊、鉚接(方法:使多個零件相連接的方法)或螺釘聯接。鋼板之間拼縫處應搭接后表里更換斷續點焊或鉚接。加工完后應涂防銹漆(Antirust paint)一道再涂面漆。保溫醫用門型骨架焊好后涂一道防銹漆，按骨架規范加工切開金屬絕熱材料夾芯板，將夾芯板嵌入（to insert）醫用門扇骨架中，一體鉆孔鉚接或螺釘聯接。
4, industrial door frame processing passes the inspection after the laying of panel. The general door type door sector plate can choose spot welding, riveting or screw connection. Steel plate shall be overlapped seams between inside and OUT(出局）side the replacement of intermittent welding or riveting. After the operation should be coated with antirust paint a re coating. Thermal insulation door type skeleton after welding one coat of anti-corrosive paint, according to the Framework specification processing open sandwich plate metal thermal insulation material, the sandwich plate is embedded in the framework of integrated door leaf, drilling and riveting or screw connection.
   
　　5、醫用門扇密封膠條選用螺釘及壓條固定于醫用門扇上。
5, the door sealing strip used for screws and strip is fixed on a door leaf.